Oat milk nutrition label: what FDA requires

Updated

An oat milk label uses a 1 cup (240 mL) serving, and FDA’s guidance counts the sugars its enzymes make as Added Sugars, even with no sugar in the recipe. Here is what the panel, the ingredient statement and the claims need.

What serving size does oat milk use?

Oat milk’s FDA serving size is 1 cup (240 mL), from the 240 mL reference amount for milk and milk substitutes. It is not in the 360 mL group with soft drinks and sweetened tea and coffee.

FDA category
Milk, milk-substitute beverages, milk-based drinks
Reference amount
240 mL
On the label
1 cup (240 mL)8 fl oz (240 mL)

21 CFR 101.12, Table 2Open this category in the serving size tool

Which label format does my oat milk package need?

It depends on how much one package holds against the 240 mL reference amount. These are Oatly’s US cartons, with the size and serving as Oatly prints them.

We found no oat milk sold above 480 mL up to 720 mL (over 16.2 up to 24.3 fl oz) on oatly.com or Amazon US; one sold on its own would need a dual column label. Sizes and servings as printed on each product page, read 12 Nov 2026.

Concentrates, tabular layouts, net quantity and dual column in Studio

Selling a concentrate or a powder? Its reference amount is the amount that makes 240 mL of drink. A tabular layout is allowed only when the package has less than about 3 inches of continuous vertical space for the panel, which a 64 fl oz carton rarely does. The net quantity goes on the front in fluid ounces, with the largest whole unit for packages of a pint up to a gallon (21 CFR 101.7), and in metric, which the Fair Packaging and Labeling Act requires: 64 FL OZ (2 QT) 1.89 L. Studio exports the standard vertical panel. For a dual column label, Studio gives the numbers for both columns and your designer sets the layout.

101.9(b)(6) single-serving containers101.9(b)(12)(i) dual column101.9(d)(11)(iii) tabular101.7 net quantity15 U.S.C. 1453 metric net quantityFind your format in 10 questions

What is different about labeling oat milk?

  1. 1

    Sugars made by enzymes in oat milk count as Added Sugars

    Declare them even when the recipe has no sugar. Take the figure from your oat base specification, or measure it if you run the enzyme step.

    Why, and what to do

    Oat milk makers break oat starch down with enzymes, which makes sugars, mostly maltose, that were not free in the oats. FDA’s guidance says sugars made by controlled hydrolysis are Added Sugars, even when the hydrolysis is for texture rather than sweetness, and it names oat drinks directly. Lactose-free dairy milk is different: splitting lactose with lactase does not create Added Sugars.

    Added Sugars are the sugars after hydrolysis minus the free sugars already in the oats. If you buy a hydrolyzed oat base, its supplier’s specification gives the figure. If you run the enzyme step yourself, measure the sugars before and after it. Either way, keep the record.

    FDA Added Sugars Q&A, Q15 (oat drinks) and Q16 (lactase)101.9(g)(10)(iv) recordsHow to determine Added Sugars

  2. 2

    Oat milk %DV uses the current Daily Values

    Calcium is 1,300 mg now, not 1,000 mg. Vitamin and mineral %DV over 10% up to 50% rounds to the nearest 5%.

    Why, and what to do

    The Daily Value for calcium is 1,300 mg, up from 1,000 mg before the 2016 update. For vitamins and minerals, a %DV up to 10% is rounded to the nearest 2%, over 10% up to 50% to the nearest 5%, and over 50% to the nearest 10%.

    101.9(c)(8)(iii)101.9(c)(8)(iv)Look up any Daily Value

  3. 3

    Calling it oat milk

    “Oat milk” is acceptable. A voluntary “lower in protein than milk” statement is recommended.

    Why, and what to do

    FDA’s draft guidance on plant-based milk alternatives says names like “oat milk” are acceptable. When a nutrient is lower than in dairy milk, it recommends a voluntary statement such as “Contains lower amounts of protein than milk”. For oat milk, protein is the one most likely to need it, at about 3 g a cup against about 8 g in milk. As of November 2026 the guidance is still a draft and is not binding.

    FDA, plant-based milk alternatives draft guidance (Feb 2023)

Which nutrients must oat milk declare?

Four vitamins and minerals are always required. Any you add to fortify become required too. One below 2% DV may move to a “Not a significant source of…” line.

Oatly Chilled Oatmilk Original, 64 fl oz, as published on oatly.com (opens in a new tab), read 12 Nov 2026.
Required on every panel
Vitamin D 3.6mcg, Calcium 350mg, Iron 0.3mg, Potassium 390mg. Declare them whether or not you fortify.
Required because the product adds them
Vitamin A 160mcg, Riboflavin 0.6mg, Vitamin B12 1.2mcg, Phosphorus 270mg. Its ingredients add vitamin A acetate, riboflavin and vitamin B12, and calcium phosphates that add phosphorus as well as calcium, so each is declared with its %DV. A mineral added only for a technical reason, such as dipotassium phosphate as a buffer, does not make its line required.
Added Sugars, from the enzymes
7g, 14% DV, with no sugar in the ingredients. Oatly notes on the page that these sugars form when its oats are broken down.

101.9(c)(8)(ii)Every part of the panel, explained

How do I write the oat milk ingredient statement?

Order and the 2% rule

Most to least by weight. Ingredients at 2% or less can follow “Contains 2% or less of”, in any order.

101.4(a)(2)

Enzymes

They work as processing aids, so they are usually not declared.

101.100(a)(3)

Allergens

Oats are not a major allergen. Declare any of the nine your recipe has, including in the enzymes or premix. “May contain” is voluntary.

Allergen rules

Bioengineered disclosure

Until 1 Jan 2028, refined canola oil needs no disclosure if records show no detectable modified genetic material. A federal court has vacated that exclusion from that date, along with the QR code and text message disclosure options, so plan for label changes. Makers under $2.5 million a year are exempt.

7 CFR 66The 2028 court order, explained

Which claims can oat milk make?

  • Not allowed

    “No sugar added”

    The enzyme step raises the sugar content.

    Why

    Enzyme treatment raises the sugar content (101.60(c)(2)(iii)), and plain milk, the food oat milk stands in for, does not normally contain added sugars ((c)(2)(iv)). Either one rules the claim out.

    101.60(c)(2)
  • Have it reviewed

    “Unsweetened”

    Factual only if no sweetening ingredient was added.

    Why

    FDA does not define “unsweetened”; 101.60(c)(3) only lets a factual statement like it stand outside the sugar claim rules. On a panel that declares Added Sugars from hydrolysis it can read as misleading, so have the wording reviewed.

    101.60(c)(3)
  • At 20% DV or more

    “Excellent source of calcium”

    “Good source” needs 10% to 19%.

    Why

    “Excellent source” needs at least 20% DV of calcium per 240 mL reference amount; “good source” needs 10% to 19%.

    101.54(b), (c)
  • Rarely met

    Oat heart health claim

    Needs 0.75 g soluble fiber from whole oats, a low-fat drink and 10% DV of a nutrient before fortifying. Most oat milks miss.

    Why

    Needs at least 0.75 g soluble fiber per 240 mL from an eligible whole oat source (or 0.75 g beta-glucan from oatrim). The drink must be low fat (fat from the oats themselves does not count against it), low saturated fat and low cholesterol, with no more than 480 mg sodium. Before any fortification it must already give at least 10% DV of protein, fiber, calcium, iron, vitamin A or vitamin C. Added oil or the 10% rule rules most oat milks out.

    101.81(c) and 101.14(e)
  • With records

    “Gluten-free”

    A test of the finished drink may not be accepted on its own.

    Why

    Because the drink is hydrolyzed, a test of the finished drink may not be a valid method on its own. Keep records that the food was gluten-free before hydrolysis, and of how you control cross-contact.

    101.91(c)(2)

What do oat milk brands declare?

Across 78 US oat milks, the median label declares 120 calories, 7g Added Sugars and 2g protein per cup. Barista lines run higher, at a median 140 calories and 7g fat.

Per 1 cup, as 32 brand owners declared 78 oat milks to USDA FoodData Central, rounded the way a label rounds them.

Per 1 cup (240 mL), all lines
NutrientLowMedianHigh
Calories78 products20120200
Total fat78 products0.5g5g12g
Total sugars76 products0g7g20g
Added Sugars68 products0g7g20g
Protein78 products<1g2g8g
Calcium78 products0mg310mg900mg
Vitamin D30 products0mcg2.4mcg4.8mcg
Potassium78 products0mg220mg530mg

Download the data (CSV) From FoodData Central’s branded foods release of 29 Oct 2026, records built from label data only. They were published May 2022 to Nov 2023, so some recipes have changed since.

Questions about oat milk labels

Does oat milk have Added Sugars if I add no sugar?

Yes, when the oats are broken down with enzymes as a controlled step, even if that is for texture rather than sweetness. FDA’s guidance counts those sugars as Added Sugars. Use your oat base supplier’s figure for the sugars made by hydrolysis, or measure the sugars before and after your own enzyme step, and keep the record.

Read on FDA.gov ↗

Can my oat milk say “no sugar added”?

No. Enzyme treatment raises the sugar content, and plain milk, which oat milk stands in for, does not normally contain added sugars; either rules the claim out. “Unsweetened” is a factual statement that no sweetening ingredient was added, but on a panel that declares Added Sugars, have that wording reviewed.

Read on eCFR ↗

What serving size do I use for oat milk?

1 cup or 8 fl oz (240 mL). Oat milk is in FDA’s milk category, which includes milk substitutes. A bottle under 480 mL sold on its own is one serving, for example “1 bottle (330 mL)”.

Read on eCFR ↗

Do I have to fortify oat milk?

No. But vitamin D, calcium, iron and potassium must be declared on every panel whether you fortify or not. Any vitamin or mineral you add, such as vitamin A, riboflavin or B12, must then be declared too.

Read on eCFR ↗

When does an oat milk bottle need a dual column label?

When it holds 200% to 300% of the 240 mL reference amount, 480 to 720 mL (about 16.2 to 24.3 fl oz), and is sold on its own. It then needs a column per cup and a column for the whole bottle. Oatly’s 64 and 32 fl oz cartons are over 300% and its 8 fl oz carton is under 200%, so none of them needs one.

Read on eCFR ↗

Can I label my oat milk gluten-free?

Only with records. Because oat milk is hydrolyzed, a test of the finished drink may not be accepted on its own, so keep records showing the food was gluten-free before hydrolysis, plus how you control cross-contact.

Read on eCFR ↗

Can I call my product oat milk?

FDA’s draft guidance on plant-based milk alternatives says names like “oat milk” are acceptable. It recommends a voluntary statement when a nutrient is lower than in dairy milk, for oat milk most often protein. The guidance is a draft and is not binding.

Read on FDA.gov ↗

Sources and method

This guide is educational and is not legal advice. FDA guidance states FDA’s current thinking and is not binding. Check each rule against the current regulation before you print a label.

Label your oat milk

Enter your oat base from its specification sheet, add your fortification, and export an FDA-format panel with every version kept. Making labels for several clients? Each recipe keeps its own history.